



Papers Published in International Journals
1. Dr Geeta S Lathkar
Sr. No. |
Name of Author(s) |
Full Title of the Paper |
Journal Name |
Volume No |
Issue No. |
Year of Publication |
From Page To Page (pp) |
1 |
V.P.Mhala , Dr.G.S.Lathkar |
Contact Deformation of Machine Tool Joints Using UHMWPE under varying process parameters and Environmental Condition |
Institute of Engineers Journals |
89 |
- |
Sept. 2008 |
12-15 |
2 |
Mrs.G.S.Lathkar & Prof.S.K.Basu |
Some Experiments in Machining Using Grease Based Solid Lubricant |
Journal of Institute of Engineers |
|
|
2011 |
|
3 |
M.S.Kadam, Dr.B.M.Dabade & Dr.Mrs.G.S.Lathkar |
Experimental Investigation and Comparative Performance of the Titanium Coated Carbide Inserts for Turning of Hardened Steel Material |
International Journal of Emerging Technologies and Applications in Engineering Technology and Sciences (IJ-CA-ETS) |
|
|
9/4/2010 |
|
4 |
M.S.Kadam, Dr.B.M.Dabade & Dr.Mrs.G.S.Lathkar |
Through RSM Based Models Condition based system reliability with imperfect preventive maintenance |
International Journal of Emerging Technologies and Applications in Engineering Technology and Sciences (IJ-CA-ETS) |
|
|
9/4/2010 |
|
5 |
S.H.Sarje1, Dr.(Mrs.)G.S.Lathkar2, Dr.S.K.Basu3 |
Development of Epoxy Composite filled Micro Tungsten Disulphide Particles And Its Mechanical Properties |
|
|
|
|
|
6 |
Dr.Mrs.)G.S.Lathkar2, Dr.S.B.Sharma3) |
Failure prevention of hydraulic system based on oil contamination |
|
|
|
|
|
7 |
Manmohansingh Rajput1, Dr.(Mrs.)G.S.Lathkar2, Dr.Basu S.K.3 |
Reliability analysis of electro-hydraulic based auto leveling system for mobile platform |
(IJEIT) |
Vol.-I |
Issue 2 |
|
|
8 |
Manmohansingh Rajput1, M.D.Jaybhaye2, Dr.(Mrs.)G.S.Lathkar3, Dr.Basu S.K.4 |
CBM policy for an online continuously monitored deteriorating system with random change of mode |
|
93 (1), |
|
Feb. 2012 |
27-32 |
9 |
S.H.Sarje1*, Dr.Mrs.G.S.Lathkar2, Dr.Basu S.K.3 |
Monte Carlo simulation of two echelon supply chain |
Journal of Institution of Engineer (India), |
Vol. VI |
issue No.2 |
|
|
10 |
S.H.Sarje1*, Dr.(Mrs.)G.S.Lathkar2 |
Sensitivity analysis for the mathematical model of surface roughness and tool wear while machining of HCHCr using PVD coated end milling cutters |
Journal of institute of industrial Engineers |
|
|
(Jan-March 2012) |
|
11 |
1Biradar S.K., 2Dr.(Mrs.)G.S.Lathkar |
Sensitivity analysis for the mathematical model of surface roughness and tool wear while machining of HCHCr using PVD coated end milling cutters |
AIMTDR |
|
|
Feb. 2013 |
|
12 |
Bachchhav B.D., Lathkar G.S., Bagchi |
Criticality assessment in lubricant selection for metal forming processes by AHP |
|
|
|
|
|
13 |
Bachchhav B.D., Lathkar G.S., Bagchi H |
|
|
|
|
|
|
14 |
Bachchhav B.D., Lathkar G.S., Bagchi H |
|
|
|
|
|
|
15 |
Bachchhav B.D., Lathkar G.S., Bagchi H |
|
|
|
|
|
|
16 |
Bachchhav B.D., Lathkar G.S., Bagchi H |
|
|
|
|
|
|
2. R R Alurwad
Sr. No. |
Name of Author(s) |
Full Title of the Paper |
Journal Name |
Volume No |
Issue No. |
Year of Publication |
From Page To Page (pp) |
1 |
Mr. R. R. Alurwad
|
Seismic Analysis of Reinforced Concrete Frame With Infilled Wall |
|
|
|
|
|
3. Maithili Mangalgiri
Sr. No. |
Journal Title |
Paper Title |
ISSN No. |
Issue No. |
Date |
1 |
“ International Journal of Innovative Research in Advanced Engineering (IJIRAE) |
E-MENU Card Systems for Restaurant |
ISSN: 2349-2163 |
Issue-1/37 - 42 |
July 2014 |
Papers Published in National Journals
1. Dr Geeta S Lathkar
-
Paper published in 2nd International and 23rd All India Manufacturing Technology, Design and Research conference (AIMTDR 2008) Chennai “Evaluation of surface roughness while machining M.S and EN-8 and analysis of Geometric error” S.P.Lathkar, Ch.Sureshkumar, Dr.G.S.Lathkar & Dr.S.K.Basu.
-
Paper Selected in 2nd International and 23rd All India Manufacturing Technology, Design and Research conference (AIMTDR 2008), Chennai “Experimental Investigation And Optimization Of Tool Life While Turning O.H.N.S. By Using Coated Carbide Inserts.” N.A. Kadam and Dr.G.S.Lathkar.
-
Bachchhav B.D., Lathkar G.S., Bagchi H., “Tribology of easter added lubricants”, Journal of Tribology and Surface Engineering, Vol. 3,
Issue : 1-2, Jul-Sept. 2012, [ISSN : 1949-4866], NOVA Science Publishers, Inc., USA.
-
Bachchhav B.D., Lathkar G.S., Bagchi H., “Tribology of drawing lubricants for low carbon steel”, Industrial Lubrication and Tribology,
[ISSN:0036-8792], Emerald Group Publishing Limited. (Accepted for Publication).
-
Bachchhav B.D., Lathkar G.S., Bagchi H., “A study of tribo-characterstics of deep drawing oils”, Journal of Manufacturing Engineering, Vol. 6,
Issue : 3, Sept. 2-11, pp. 147-152. [ISSN : 0973-6867].
Paper Presented in National Conferences
1. Dr Geeta S Lathkar
-
Clean Metal Cutting Process Using Solid Lubricants (Mrs. G.S. Lathkar & Prof. S.K. Basu Paper was presented in AIMTDR conference 2000 at Chennai).
-
“Some Experiments in Machining Using Grease Based Solid Lubricant, (Mrs.G.S.Lathkar & Prof.S.K.Basu Paper was presented in Journal of Institute of Engineers 2001).
-
“Optimization of Cutting Parameters In Fine Machining Using Sequential Search” (Dr.Mrs.G.S.Lathkar & Prof.S.K.Basu Paper was presented in BHU, Varanasi in 18-19th January 2002).
-
“Criticality Assessment of Clean Metal Cutting Parameters Using Digraph and AHP”,(Dr.Mrs.G.S.Lathkar & Prof.S.K.Basu, Mr.M.D.Jaybhaye) Paper was presented in National Conference on Advances in Manufacturing Systems, AMS 28-29th March 2003 Production Engineering Dept. Jadavpur University, Kolkata.
-
“Optimum cut-plan selection and Machine allocation in manufacturing” paper presented at Vellore in 21st AIMTDR conference by (Dr.Mrs.G.S.Lathkar & Dr.S.K.Basu, December 2004.)
-
Development of Epoxy Composite filled Micro Tungsten Disulphide Particles And Its Mechanical Properties (J.S.Sidhu1, Dr.(Mrs.)G.S.Lathkar2, Dr.S.B.Sharma3)
-
“Failure prevention of hydraulic system based on oil contamination.” (Manmohansingh Rajput1, Dr.(Mrs.)G.S.Lathkar2, Dr.Basu S.K.3)
-
“Reliability analysis of electro-hydraulic based auto leveling system for mobile platform.” (IJEIT) Vol.-I, Issue 2, Feb. 2012 (Manmohansingh Rajput1, M.D.Jaybhaye2, Dr.(Mrs.)G.S.Lathkar3, Dr.Basu S.K.4)
-
“CBM policy for an online continuously monitored deteriorating system with random change of mode.” Journal of Institution of Engineer (India), Springer (Jan-March 2012) 93 (1), 27-32. (S.H.Sarje1*, Dr.(Mrs.)G.S.Lathkar2, Dr.Basu S.K.3)
-
“Monte Carlo simulation of two echelon supply chain.” Accepted for publication in Journal of institute of industrial Engineers. (S.H.Sarje1*, Dr.(Mrs.)G.S.Lathkar2)
-
“Condition based system reliability with imperfect preventive maintenance” accepted in AIMTDR Conference. (S.H.Sarje1*, Dr.(Mrs.)G.S.Lathkar2, Dr.Basu S.K.3)
-
“Optimization of PVD Coating Thickness on End Milling Cutter for Evaluation of Tool Wear Under the Influence of Solid Lubricant MoS2 Using Response Surface Methodology” ASME Conference North Western University, Chicago. (1Biradar S.K., 2Dr.(Mrs.)G.S.Lathkar, 3Dr.Basu S.K.)
-
“Sensitivity analysis for the mathematical model of surface roughness and tool wear while machining of HCHCr using PVD coated end milling cutters” AIMTDR, Jadhavpur University, Kolkata. (1Biradar S.K., 2Dr.(Mrs.)G.S.Lathkar)
-
Archana M. Rajurkar & Geeeta S. Lathkar, “Research & Development Challenges for Women Engineers in the Field of Software Industries” Proc. National Seminar on Issues Pertaining to Women in Technical Education, at Government College Engineering, Raipur, 16-17 Jan. 1997.