-
Total Number of Papers in International refereed Journals: 21
-
Total Number of Papers in National Journals: 05
-
Total Number of Papers in International Conferences: 10
-
Total Number of Papers in National Conferences: 20
Papers Published in International Journals
1. Dr. Mrs. G. S. Lathkar
Sr. No. |
Name of Author(s) |
Full Title of the Paper |
Journal Name |
Volume No |
Issue No. |
Year of Publication |
From Page To Page (pp) |
1 |
V.P.Mhala , Dr.G.S.Lathkar |
Contact Deformation of Machine Tool Joints Using UHMWPE under varying process parameters and Environmental Condition |
Institute of Engineers Journals |
89 |
- |
Sept. 2008 |
12-15 |
2 |
Mrs.G.S.Lathkar & Prof.S.K.Basu |
Some Experiments in Machining Using Grease Based Solid Lubricant |
Journal of Institute of Engineers |
|
|
2011 |
|
3 |
M.S.Kadam, Dr.B.M.Dabade & Dr.Mrs.G.S.Lathkar |
Experimental Investigation and Comparative Performance of the Titanium Coated Carbide Inserts for Turning of Hardened Steel Material |
International Journal of Emerging Technologies and Applications in Engineering Technology and Sciences (IJ-CA-ETS) |
|
|
9/4/2010 |
|
4 |
M.S.Kadam, Dr.B.M.Dabade & Dr.Mrs.G.S.Lathkar |
Through RSM Based Models Condition based system reliability with imperfect preventive maintenance |
International Journal of Emerging Technologies and Applications in Engineering Technology and Sciences (IJ-CA-ETS) |
|
|
9/4/2010 |
|
5 |
S.H.Sarje1, Dr.(Mrs.)G.S.Lathkar2, Dr.S.K.Basu3 |
Development of Epoxy Composite filled Micro Tungsten Disulphide Particles And Its Mechanical Properties |
|
|
|
|
|
6 |
Dr.Mrs.)G.S.Lathkar2, Dr.S.B.Sharma3) |
Failure prevention of hydraulic system based on oil contamination |
|
|
|
|
|
7 |
Manmohansingh Rajput1, Dr.(Mrs.)G.S.Lathkar2, Dr.Basu S.K.3 |
Reliability analysis of electro-hydraulic based auto leveling system for mobile platform |
(IJEIT) |
Vol.-I |
Issue 2 |
|
|
8 |
Manmohansingh Rajput1, M.D.Jaybhaye2, Dr.(Mrs.)G.S.Lathkar3, Dr.Basu S.K.4 |
CBM policy for an online continuously monitored deteriorating system with random change of mode |
|
93 (1), |
|
Feb. 2012 |
27-32 |
9 |
S.H.Sarje1*, Dr.Mrs.G.S.Lathkar2, Dr.Basu S.K.3 |
Monte Carlo simulation of two echelon supply chain |
Journal of Institution of Engineer (India), |
Vol. VI |
issue No.2 |
|
|
10 |
S.H.Sarje1*, Dr.(Mrs.)G.S.Lathkar2 |
Sensitivity analysis for the mathematical model of surface roughness and tool wear while machining of HCHCr using PVD coated end milling cutters |
Journal of institute of industrial Engineers |
|
|
(Jan-March 2012) |
|
11 |
1Biradar S.K., 2Dr.(Mrs.)G.S.Lathkar |
Sensitivity analysis for the mathematical model of surface roughness and tool wear while machining of HCHCr using PVD coated end milling cutters |
AIMTDR |
|
|
Feb. 2013 |
|
12 |
Bachchhav B.D., Lathkar G.S., Bagchi |
Criticality assessment in lubricant selection for metal forming processes by AHP |
|
|
|
|
|
13 |
Bachchhav B.D., Lathkar G.S., Bagchi H |
|
|
|
|
|
|
14 |
Bachchhav B.D., Lathkar G.S., Bagchi H |
|
|
|
|
|
|
15 |
Bachchhav B.D., Lathkar G.S., Bagchi H |
|
|
|
|
|
|
16 |
Bachchhav B.D., Lathkar G.S., Bagchi H |
|
|
|
|
|
|
2. Dr. M. G. Harkare
Sr. No. |
Name of Author(s) |
Full Title of the Paper |
Journal Name |
Volume No |
Issue No. |
Year of Publication |
From Page To Page (pp) |
1 |
Mr.S.P. Gadewar, Mr. P. Swaminathan, Mr. M.G.Harkare. |
“Experimental Investigation of Weld Characteristics for a single pass TIG Welding with SS304” |
International Journal of Engg. Science and Tech. |
Vol. X(XX), |
|
2010 |
1-5 |
2 |
Mr.M.G.Harkare, Mr.G.U.Shinde, Dr.B.M.Dabade |
“Thermostructural analysis of Mobile blancher component” |
International Referred Research Journal,
Research analysis and evaluation, ISSN |
VOL-II |
ISSUE 21. |
2011 |
|
3 |
Mr.M .G.Harkare, Dr.B.M.Dabade, Dr.V.B.Tungikar |
“ Design and Thermostructural analysis of a mobile Blancher for Turmeric processing”, |
International journal of Techanical Engineering Research and Development (IJMERD) |
Vol. I |
|
Oct-2011
1-5 |
24-32 |
4 |
Mr.M.G.Harkare, Dr.B.M.Dabade, Dr.V.B.Tungikar |
“Design and fabrictaiton of a mobile Blancher for Turmeric processing”, |
Australian Journal of Mechanical Engineering (AJME). |
|
|
|
|
5 |
Mr.M.G.Harkare |
CFD Analysis of Two-Stroke I.C. Engine using Ansys Fluent |
International Journal of Mechanical & Production |
Vol. IV |
Issue-IX |
Sept.14 |
|
3. Mr. J. S. Sidhu
Sr. No. |
Name of Author(s) |
Full Title of the Paper |
Journal Name |
Volume No |
Issue No. |
Year of Publication |
From Page To Page (pp) |
1 |
M.H. Shaikh G.J. Pawar J.S. Sidhu'
Dr. S.B. Sharma
|
Tribological Characterization and Morphological study of Epoxy composites filled with WS2 under Dry sliding |
IJSR, India |
|
2319 |
2013 |
|
2 |
J.S. Sidhu, G.S. Lathkar, S.B. Sharma
|
“ Mechanical properties of Micro Tungesten disulphide particle Filled Epoxy Composite & its resistance against sliding wear” |
Malaysian Polymer Journal |
vol.9 |
|
2014 |
PP-24-32 |
3 |
M.H. Shaikh, J.S. Sidhu
|
Experimental Investigation & Optimization of process Parameters in Turning of AISI D2 Steel using Different Lubricants |
IJEAT |
vol3 |
issue-5 |
2014 |
|
4 |
S.N. Naik, J.S. Sidhu
|
Optimization of cutting Parameters of SS316 using Different cutting Tools on CNC Lathe |
IJSRMS |
vol1 |
issue-9 |
2015 |
PP-275-282 |
5 |
J.S. Sidhu, G.S. Lathkar, S.B. Shrama
|
Design of Epoxy Based Resin Composites for Automotive Applications: A Case Study on I C Engine Valve guide |
Communicated to IEIC for publication |
|
|
|
|
4. Mr. P. S. More
Sr. No. |
Name of Author(s) |
Full Title of the Paper |
Journal Name |
Volume No |
Issue No. |
Year of Publication |
From Page To Page (pp) |
1 |
Pratap S. More &
Prof. Azim Aijaz |
Thermal Analysis Of Energy And Exergy Analysis Of Back Pressure Steam Turbine In Sugar Cogeneration Plant |
IJETAE |
4 |
1 |
January2014 |
674-682 |
Papers Published in National Journals
1. Dr. Mrs. G. S. Lathkar
-
Paper published in 2nd International and 23rd All India Manufacturing Technology, Design and Research conference (AIMTDR 2008) Chennai “Evaluation of surface roughness while machining M.S and EN-8 and analysis of Geometric error” S.P.Lathkar, Ch.Sureshkumar, Dr.G.S.Lathkar & Dr.S.K.Basu.
-
Paper Selected in 2nd International and 23rd All India Manufacturing Technology, Design and Research conference (AIMTDR 2008), Chennai “Experimental Investigation And Optimization Of Tool Life While Turning O.H.N.S. By Using Coated Carbide Inserts.” N.A. Kadam and Dr.G.S.Lathkar.
-
Bachchhav B.D., Lathkar G.S., Bagchi H., “Tribology of easter added lubricants”, Journal of Tribology and Surface Engineering, Vol. 3,
Issue : 1-2, Jul-Sept. 2012, [ISSN : 1949-4866], NOVA Science Publishers, Inc., USA.
-
Bachchhav B.D., Lathkar G.S., Bagchi H., “Tribology of drawing lubricants for low carbon steel”, Industrial Lubrication and Tribology,
[ISSN:0036-8792], Emerald Group Publishing Limited. (Accepted for Publication).
-
Bachchhav B.D., Lathkar G.S., Bagchi H., “A study of tribo-characterstics of deep drawing oils”, Journal of Manufacturing Engineering, Vol. 6,
Issue : 3, Sept. 2-11, pp. 147-152. [ISSN : 0973-6867].
Paper Presented in International Conferences
1. Dr. Mrs. G. S. Lathkar
-
Paper selected in ASME conference from October 7-10, 2008, North Western University, Evanston, IL, USA, Chicago, “Surface Finish in Hard Machining by PVD-Coated End-Mills using solid lubricant” MSEC 2008 & ICM & P 2008.
-
“Experimental Investigation and Comparative Performance of the Titanium Coated Carbide Inserts for Turning of Hardened Steel Material” paper published in International Journal of Emerging Technologies and Applications in Engineering Technology and Sciences (April/July 2010 IJ-CA-ETS) by M.S.Kadam, Dr.B.M.Dabade & Dr.Mrs.G.S.Lathkar, (9/4/2010)
-
“Analysis of Surface Roughness and Tool Wear in Finish Hard Turned Jobs Through RSM Based Models” paper published in International Journal of Emerging Technologies and Applications in Engineering Technology and Sciences (April/July 2010 IJ-CA-ETS) by M.S.Kadam, Dr.B.M.Dabade & Dr.Mrs.G.S.Lathkar, (9/4/2010)
-
“Condition based system reliability with imperfect preventive maintenance”, (S.H.Sarje1*, Dr.(Mrs.)G.S.Lathkar2, Dr.S.K.Basu3)
-
Bachchhav B.D., Lathkar G.S., Bagchi H., “General tribological evaluation of deep drawing oils”, Journal of Manufacturing Technology Today, Vol. 10, Issue : 9, Sept. 2011, pp. 12-16. [ISSN : 0972-7396].
-
Bachchhav B.D., Lathkar G.S., Bagchi H., “General tribological evaluation of deep drawing oils”, Journal of Manufacturing Technology Today, Vol.10, Issue 9, Sept. 2011, pp.12-16. [ISSN : 0972-7396].
-
Bachchhav B.D., Lathkar G.S., Bagchi H., “Frictional characteristics of lubricants for 1010 low carbon steel/steel in sliding contact”, International Conference on Materials Processing and Characterization (ICMPC-2012), pp.479-483. March, 8-10, 2012, Hyderabad, India.
-
Bachchhav B.D., Lathkar G.S., Bagchi H., “Lubricant selection for metal forming processes by subjective and objective integrated multi-attribute decision making method”, International Conference on Industrial Tribology (ICIT-2012), TSI 812543, Dec., 7-9, 2012, Pune, India.
-
“Multiobjective Optimization of End Milling HCHCr using AlCrN PVD Coated Cutters with MOGA and RSMO”,ASME 2014 International Manufacturing Science & Engg. Conference, June9-13, 2014, Detroit, USA.
-
“ Analysis of used oil on the basis of wear volume using Taguchi Method”,IOSR Journal of Engineering(IOSRJEN),ISSN(e):2250-3021,ISSN(p):2278 – 8719Vol. 04, Issue 04(April 2014). IIV411 PP 34-40
-
“ Mechanical properties of Micro Tungesten disulphide particle Filled Epoxy Composite & its resistance against sliding wear”,Malaysian Polymer Journal, vol.9, No.-1, PP-24-32, (2014).
2. Dr. M. G. Harkare
Sr. No. |
Name of Author(s) |
Full Title of the Paper |
Conference Name |
Conference held at |
Duration of Conference |
1 |
Mr. G.U.Shinde, Dr.K.J.Kamble and Mr.M.G.Harkare |
“process optimization in Turmeric heat treatment by design and fabrication of Blancher |
International Conference on Environmental and Agriculture Engineering –ICEAE, |
Chengdu, China |
2011 |
3. Mr. J. S. Sidhu
Sr. No. |
Name of Author(s) |
Full Title of the Paper |
Conference Name |
Conference held at |
Duration of Conference |
1 |
J.S. Sidhu,
Dr. Mrs. G.S. Lathkar |
Development of Epoxy composite filled with Micro Tungsten Disulphide Particles and Its Mechanical Properties |
International Conference on Advanced Material and Manufacturing Science(ICAMMS-2012) |
Beijing, China |
20-21, Dec. 2012 |
4. Mr. J. K. Sawale
Sr. No. |
Name of Author(s) |
Full Title of the Paper |
Conference Name |
Conference held at |
Duration of Conference |
1 |
J.K. Sawale |
Experimental Investigation for the selection of optimum machining parameters for MMR in EDM for EN-24 |
|
Amrutvahini college of Engineering, Sangamner, dist. Ahmednagar |
12th March to 14th March 2012 |
2 |
J.K. Sawale |
Parameter optimization for MRR in EDM with HCHCR material |
|
Amrutvahini college of Engineering, Sangamner, dist. Ahmednagar |
12th March to 14th March 2012 |
3 |
J.K. Sawale |
Study of the effect of machining parameters on MRR in EDM for material AISI D3 |
|
Deogiri college of Engineering, Aurangabad |
23rd March to 25th March 2012 |
4 |
J.K. Sawale |
Mathematical modeling for MRR in EDM for HCHCR material |
|
Deogiri college of Engineering, Aurangabad |
|
5 |
J.K. Sawale |
Experimental Investigations in friction stir drilling on mild steel and Al. by using Tungsten carbide tool |
|
|
|
6 |
J.K. Sawale |
Mathematical modeling and process parameter optimization for surface roughness in EDM for EN-31 material by RSM |
|
PDA COE, Gulbarga |
|
7 |
J.K. Sawale |
Experimental Investigations in friction stir drilling on mild steel and Al. by using Tungsten carbide tool |
|
|
23rd Sept 2012 |
8 |
J.K. Sawale |
Modeling electric discharge machine |
|
|
|
5. Mr. N. A. Kadam
Sr. No. |
Name of Author(s) |
Full Title of the Paper |
Conference Name |
Conference held at |
Duration of Conference |
1 |
Kadam N.A. and Lathkar G.S. |
Experimental Investigation and optimization of tool life while turning OHNS by coated carbide inserts |
2nd International & 23rd AIMTDR, IIT, Madras |
IIT, Madras |
15th to 17th Dec.2008 |
6. Mr. S. S. Jarikote
Sr. No. |
Name of Author(s) |
Full Title of the Paper |
Conference Name |
Conference held at |
Duration of Conference |
1 |
1.Jarikote S.S.
2.Pimpalgaonkar D.S.
|
Warranty Cost Analysis of Product by FPm |
Advances in Mechanical Engineering |
Amrutwahini COE, Sangamner, Dist. Ahmednagar |
12 March To 14 March 2012 |
Paper Presented in National Conferences
1. Dr. Mrs. G. S. Lathkar
-
Clean Metal Cutting Process Using Solid Lubricants (Mrs. G.S. Lathkar & Prof. S.K. Basu Paper was presented in AIMTDR conference 2000 at Chennai).
-
“Some Experiments in Machining Using Grease Based Solid Lubricant, (Mrs.G.S.Lathkar & Prof.S.K.Basu Paper was presented in Journal of Institute of Engineers 2001).
-
“Optimization of Cutting Parameters In Fine Machining Using Sequential Search” (Dr.Mrs.G.S.Lathkar & Prof.S.K.Basu Paper was presented in BHU, Varanasi in 18-19th January 2002).
-
“Criticality Assessment of Clean Metal Cutting Parameters Using Digraph and AHP”,(Dr.Mrs.G.S.Lathkar & Prof.S.K.Basu, Mr.M.D.Jaybhaye) Paper was presented in National Conference on Advances in Manufacturing Systems, AMS 28-29th March 2003 Production Engineering Dept. Jadavpur University, Kolkata.
-
“Optimum cut-plan selection and Machine allocation in manufacturing” paper presented at Vellore in 21st AIMTDR conference by (Dr.Mrs.G.S.Lathkar & Dr.S.K.Basu, December 2004.)
-
Development of Epoxy Composite filled Micro Tungsten Disulphide Particles And Its Mechanical Properties (J.S.Sidhu1, Dr.(Mrs.)G.S.Lathkar2, Dr.S.B.Sharma3)
-
“Failure prevention of hydraulic system based on oil contamination.” (Manmohansingh Rajput1, Dr.(Mrs.)G.S.Lathkar2, Dr.Basu S.K.3)
-
“Reliability analysis of electro-hydraulic based auto leveling system for mobile platform.” (IJEIT) Vol.-I, Issue 2, Feb. 2012 (Manmohansingh Rajput1, M.D.Jaybhaye2, Dr.(Mrs.)G.S.Lathkar3, Dr.Basu S.K.4)
-
“CBM policy for an online continuously monitored deteriorating system with random change of mode.” Journal of Institution of Engineer (India), Springer (Jan-March 2012) 93 (1), 27-32. (S.H.Sarje1*, Dr.(Mrs.)G.S.Lathkar2, Dr.Basu S.K.3)
-
“Monte Carlo simulation of two echelon supply chain.” Accepted for publication in Journal of institute of industrial Engineers. (S.H.Sarje1*, Dr.(Mrs.)G.S.Lathkar2)
-
“Condition based system reliability with imperfect preventive maintenance” accepted in AIMTDR Conference. (S.H.Sarje1*, Dr.(Mrs.)G.S.Lathkar2, Dr.Basu S.K.3)
-
“Optimization of PVD Coating Thickness on End Milling Cutter for Evaluation of Tool Wear Under the Influence of Solid Lubricant MoS2 Using Response Surface Methodology” ASME Conference North Western University, Chicago. (1Biradar S.K., 2Dr.(Mrs.)G.S.Lathkar, 3Dr.Basu S.K.)
-
“Sensitivity analysis for the mathematical model of surface roughness and tool wear while machining of HCHCr using PVD coated end milling cutters” AIMTDR, Jadhavpur University, Kolkata. (1Biradar S.K., 2Dr.(Mrs.)G.S.Lathkar)
-
Archana M. Rajurkar & Geeeta S. Lathkar, “Research & Development Challenges for Women Engineers in the Field of Software Industries” Proc. National Seminar on Issues Pertaining to Women in Technical Education, at Government College Engineering, Raipur, 16-17 Jan. 1997.
2. Dr. M. G. Harkare
Sr. No. |
Name of Author(s) |
Full Title of the Paper |
Conference Name |
Conference held at |
Duration of Conference |
1 |
Mr. M.G. Harkare |
“Natural Gas as I.C. Engine Fuel” |
National Conference |
COE, Pusad. |
1998 |
2 |
Mr. M.G. Harkare |
“Emission Reducing Trends & its control”, |
National Conference |
COE, Pusad. |
1998 |
3 |
Mr.Nagnath Deshpande & Mr.M.G.Harkare |
“Failure Analysis of heat exchanger tube die to corrosion” |
National Conference |
MIT, Pune |
[ 2012 ] |
3. Mr. J. S. Sidhu
Sr. No. |
Name of Author(s) |
Full Title of the Paper |
Conference Name |
Conference held at |
Duration of Conference |
1 |
S.G. Jadhav E.R. Ghogare J.S. Sidhu |
The effects of WS2 filler on Mechanical strength of Epoxy Based Resin |
National Conference on Recent trends in Mech. Engg. 2012 |
Amrutvahini C.O.E., Sangamner, Maharashtra |
19-20 March, 2005 |
2 |
R.K. Belkar Sureshkumar C. J.S. Sidhu |
Prediction and optimization of surface roughness in turning based on response surface methodology |
National Conference on Emerging Trends in Mech. Engg. 2011 |
L.R. Tiwari C.O.E., Mumbai |
|
4. Mr. S. S. Jarikote
Sr. No. |
Name of Author(s) |
Full Title of the Paper |
Conference Name |
Conference held at |
Duration of Conference |
1 |
Jarikote S.S. |
Zero Energy Hours |
- |
Mumbai |
2 days |